Loading…
Ministry of Defence
Airport Security Force · Karachi
| Item | Qty | Unit |
|---|---|---|
| Ballistic Combat Helmet | 350 | — |
| Ballistic Combat Helmet, MICH / ACH low-cut- pattern | 1 | — |
| Aramid Fiber (Kevlar® or equivalent) with thermoset resin shell construction | 2 | — |
| NIJ 0106.01 (Minimum) | 3 | — |
| MIL-STD-662F or equivalent recognized standard | 4 | — |
| Bolt Action Repeater | 2 | — |
| Ballistic and Fragmentation Protection verified by accredited laboratory to be attached with test reports/certificates to be submitted (Third party evaluation where required will be conducted at bidders expense) | 5 | — |
| 9 mm (Minimum) or equivalent to desired ballistic level | 6 | — |
| Front, back, crown and side of head | 7 | — |
| 7.5 – 8 mm + 0.5mm | 8 |
| — |
| 0.13 m2 +/- 1% | 9 | — |
| 1.6 Kg to 1.75 Kg (size dependent, must be clarified) | 10 | — |
| Adjustable 4-point chin-strap with double sided lock with Dial Ratchet retention harness | 11 | — |
| Impact-absorbing multi-pad interior suspension system (minimum 7-pad configuration or equivalent) | 12 | — |
| Small - 50 - 56 cm Medium - 52 - 58 cm Large - 56 – 64 cm | 13 | — |
| Optional polycarbonate ballistic visor, minimum 3mm – 5mm thickness, compatible with helmet shell | 14 | — |
| Side and/or NVG shroud rail mounting | 15 | — |
| Black | 16 | — |
| Chin strap, retention harness, suspension/padding system, sizing pads (as applicable) | 17 | — |
| To be specified by bidder | 18 | — |
| Minimum 5-year warranty on ballistic shell material; minimum 1-year warranty on exterior cover material and workmanship | 19 | — |
| Ballistic helmet must conform to all tests as per ballistic protection and fragmentation standards including, but not limited to:- - Ballistic Transient Deformation - Flame Test - Fragment Protection Test - Ballistic Attenuations Test - Resistance to Penetration | 20 | — |
| An “or equivalent or better, subject to technical evaluation” clause applies to all parameter | 21 | — |
| Flip to the Side Optical Magnifier | 30 | — |
| Fixed power optical magnifier, designed to be used behind a Red Dot / Reflex Sight | 1 | — |
| 6x optical magnification | 2 | — |
| 28 mm or compatible with existing HS515GM HOLOSUN | 3 | — |
| Minimum 75% | 4 | — |
| Aluminum Alloy 6061-T6 or equivalent, Hard Anodized Finish | 5 | — |
| Black | 6 | — |
| Quick detachable flip to side, compatible with standard picatinny rail | 7 | — |
| Lower 1/3rd co-witness | 8 | — |
| 2.5” (65mm) or higher | 9 | — |
| Adjustable diopter, +/- 3D or better | 10 | — |
| Integrated windage and elevation adjustments for precise zero alignment with primary optic. | 11 | — |
| Minimum IP67 | 12 | — |
| 380 grams | 13 | — |
| Mounting hardware / tool kit, lens cloth, user / operator manual | 14 | — |
| Minimum 3.5o | 15 | — |
| Minimum OEM / Supplier warranty 2 years | 16 | — |
| -20°C to 55°C or better | 17 | — |
| Light Sniper Rifle (.308 Winchester) | 6 | — |
| .308 Winchester | 1 | — |
| 24 inches | 3 | — |
| Fluted Stainless Steel | 4 | — |
| 1:8 inch | 5 | — |
| 5 Shot, Sub Shot 0.85 MOA or better | 6 | — |
| 1000 m or better | 7 | — |
| Less than or equal to 48 inches | 8 | — |
| Less than or equal to 41 inches | 9 | — |
| Rifle Area Illumination Device (Weapon Light) | 60 | — |
| Rifle Area Illumination Device (Weapon Light) | 1 | — |
| White LED | 2 | — |
| 1000 lumens or better | 3 | — |
| 80,000 cd or better | 5 | — |
| Focused high candela beam | 6 | — |
| Low / High | 8 | — |
| Integrated Tailcap Button / Remote Pressure Switch | 9 | — |
| 1 x 18650 Rechargeable Li Ion | 11 | — |
| 70765 - T6 Aluminum or Better, Hard Anodized Finish | 12 | — |
| Black | 13 | — |
| Scout pattern mounting system | 14 | — |
| Less tha 155 gram | 16 | — |
| IP68 or better | 17 | — |
| - 10°Cto 50°C or better | 18 | — |
| Rifles | 19 | — |
| Picatinny Rail + M Lock Mount | 20 | — |
| Less than or equal to 6 kgs | 10 | — |
| Minimum 10 Rounds | 11 | — |
| Foldable Stock | 12 | — |
| Height Adjustable and Reversable | 13 | — |
| Adjustable 2 Stage Trigger | 14 | — |
| 45o Thumb Operated, Ambidextrous | 15 | — |
| Ambidextrous | 16 | — |
| User interchangeable | 17 | — |
| MLOK Compatible | 18 | — |
| 5-Slot and 9-Slot M-LOK Rails | 19 | — |
| Yes | 20 | — |
| Compatible and portable handheld environmental and ballistic meter incorporating atmospheric ballistic calculation integrated sensor and an advanced solver. | 21 | — |
| Yes | 22 | — |
| 10°C to 50°C or better | 23 | — |
| Ballistic Calculator, Day Scope, Maintenance Kit, Operational Manual / Technical Manual, Field Bag, Hard Storage Case, Ear muffs, Shooting Safety glasses, Field tool kit, Picatinny rail, Magazine, Telescope Cover, Sling, Carrying and Spare | 24 | — |
| Compatible rounds Qty – 500 to be provided by bidder for test and trials at no cost no/ no obligation basis. To be deposited along with sample. | 25 | — |
| Minimum 4.5x and upto 30x or better | 27 | — |
| 56 mm | 28 | — |
| First / Second Focal Plane | 29 | — |
| 3.2 Inch or better | 39 | — |
| 8.2 – 1.2 m or better | 31 | — |
| 4.7 – 0.7o or better | 32 | — |
| 0.1 MRAD per click | 33 | — |
| 29.1 MRAD elevation / 20.4 MRAD or better | 34 | — |
| 20 Yard to infinity | 35 | — |
| Less than or equal to 1150 gram | 36 | — |
| LED powered by 1 x CR2032 battery | 37 | — |
| Multiple must be including MRAD Precision tree, MOA Precision Tree, MOA Long Range, MRAD Centre Dot | 38 | — |
| Micro Reflex Sight (Red Dot Sight)) | 60 | — |
| Enclosed micro red dot sight | 1 | — |
| 6061 T6 Aluminum or better, Hard Anodized Finish | 2 | — |
| Black | 3 | — |
| Multi Selectable Reticle System, Red Dot 2 MOA, circle 65 MOA or better, combined dot circle pattern | 4 | — |